LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Bracket Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Generator Bracket Replacement
    GM1897775Courtesy of GENERAL MOTORS CORP.
  1. Remove the generator. Refer to Generator Replacement (LH8)  or Generator Replacement (LLR) .
  2. Remove the drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement .
  3. Remove the engine wiring harness bracket bolt (4).
  4. Reposition the engine wiring harness bracket out of the way.
    5. Fig 2: View Of Generator Bracket & Bolts
    GM847280Courtesy of GENERAL MOTORS CORP.
  5. Remove the generator bracket bolts.
  6. Remove the generator bracket from the vehicle.
  7. Transfer any parts as needed.
scientia non olet · About LEMON Manuals