Inspection/Maintenance (I/M) System DTC Table
| System | DTCs Required to Set System Status to YES |
|---|---|
| If an I/M System Status indicator did NOT update to YES during the Inspection/Maintenance (I/M) System Check , review each indicator and reference this table to determine each DTC associated with the I/M System Status Indicator. Each DTC listed below has specific conditions that must be met for the diagnostic to run. Included in these conditions are additional DTCs which, if set, will inhibit these DTCs from running. Reviewing and operating the vehicle within the Conditions for Running for each DTC listed below will allow the I/M System Status Indicators to transition to YES. | |
| Catalyst | DTC P0420 |
| EVAP | DTC P0442 DTC P0443 or P0449 DTC P0446 DTC P0451, P0452, P0453, or P0454 DTC P0455 DTC P0496 |
| Oxygen Sensor | DTC P0131, P0132, P0137, or P0138 DTC P0133, P0134, P013A, P013B, P013E, P013F, P0140, P1133, P2270, P2271, or P2A00 |
| Oxygen Sensor Heater | DTC P0030, P0036, P0053, P0054, P0135, or P0141 |
| Secondary AIR Injection | DTC P0411 DTC P0412 or P0418 DTC P2430, P2431, P2432, or P2433 DTC P2440 DTC P2444 |