LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (HVAC System - Manual) >> Repair Instructions >> Mode Control Cable Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Temperature Cable & Mode Cable
    GM1273258Courtesy of GENERAL MOTORS CORP.
  1. Install the mode cable (3).

    Make certain that the cable is properly seated in the notches in the HVAC control assembly (6).

  2. Install the mode cable (3) to the HVAC control assembly (6).
  3. Install the mode cable to the retaining clip.
    4. NOTE: Refer to Fastener Notice .
  4. Install the mounting screws to the HVAC control assembly.

    Tighten:  Tighten the screws to 1.9 N.m (17 lb in)

  5. Install the radio. Refer to Radio Replacement .
    6. Fig 2: View Of Mode Cable
    GM1273255Courtesy of GENERAL MOTORS CORP.
  6. Install the mode cable (4) to the mode control cam (2).
  7. Install the mode cable (4) to the retaining clip (3).
  8. Install the radio. Refer to Radio Replacement .
  9. Install the HVAC control assembly. Refer to Heater and Air Conditioning Control Replacement .
scientia non olet · About LEMON Manuals