LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (HVAC System - Manual) >> Repair Instructions >> Mode Control Cam Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: The mode cam can be accessed from the driver side floor near the accellorator peddle.
  1. Remove the mode control cable (4) from the retaining clip (3).
    2. Fig 1: View Of Mode Cable
    GM1273255Courtesy of GENERAL MOTORS CORP.
  2. Remove the mode control cable (4) from the mode cam (2).
  3. Remove the screw (1) from the mode cam.
  4. Remove the mode cam.
scientia non olet · About LEMON Manuals