LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (HVAC System - Manual) >> Repair Instructions >> Temperature Control Cable Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .
  2. Remove the mounting screws from the HVAC control assembly.
    3. Fig 1: View Of Temperature Cable & Mode Cable
    GM1273258Courtesy of GENERAL MOTORS CORP.
  3. Remove the temperature cable (4) from the retaining clip and remove the temperature cable.
  4. Remove the temperature cable (4) from the temperature control cam (5).
  5. Fully open the I/P storage compartment.
    6. Fig 2: Locating Temperature Control Cable & Temperature Actuator Cam
    GM1273250Courtesy of GENERAL MOTORS CORP.
  6. Remove the temperature control cable from the retaining clip.
  7. Remove the temperature control cable (9) from the temperature actuator cam (10).
  8. Remove the temperature control cable.
scientia non olet · About LEMON Manuals