LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Wiper System & Washer System) >> Repair Instructions >> Washer Solvent Container Level Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Exploded View Of Washer Solvent Container
    GM1207514Courtesy of GENERAL MOTORS CORP.
  1. Position the level sensor seal (3) to the washer solvent container (1), pressing in until fully seated.
  2. Position the washer solvent level sensor (4) to the washer solvent container (1), pressing in until fully seated.
  3. Connect the washer solvent level sensor electrical connector.
  4. Install the left front fender liner. Refer to Front Fender Liner Replacement .
  5. Fill the washer solvent container with washer solvent.
scientia non olet · About LEMON Manuals