LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Wiper System & Washer System) >> Repair Instructions >> Wiper Motor Module Support Bracket Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wiper arms. Refer to Windshield Wiper Arm Replacement .
  2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
  3. Remove the wiper drive system module. Refer to Windshield Wiper System Module Replacement .
  4. Fig 1: Identifying Wiper Motor Module Support Bracket Screws
    GM1206999Courtesy of GENERAL MOTORS CORP.
  5. Remove the 3 wiper motor module support bracket screws.
  6. Remove the wiper motor module support bracket from the wiper motor.