LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (HVAC System - Automatic) >> Repair Instructions >> Blower Motor Control Processor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Blower Motor Control Processor
    GM1203578Courtesy of GENERAL MOTORS CORP.
  1. Install the blower motor control processor.
    2. NOTE: Refer to Fastener Notice .
  2. Tighten the blower motor control processor screws.

    Tighten:  Tighten the blower motor resistor screws to 1.5 N.m (13 lb in).

  3. Install the blower motor control processor wire harness connector.
  4. Install the right closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
scientia non olet · About LEMON Manuals