LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Fixed & MOVEABLE Window Systems) >> Repair Instructions >> Windshield Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a stationary window into the opening. Refer to Adhesive Installation of Stationary Windows .
  2. Install the window side reveal moldings to the vehicle. Refer to Windshield Side Reveal Molding Replacement .
    3. Fig 1: View Of Windshield Reveal Molding & Auxiliary Weatherstrip
    GM1331304Courtesy of GENERAL MOTORS CORP.
  3. Reposition the auxiliary weatherstrip (2) to the pinch-weld flange.
  4. Install the cowl air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
  5. Install the window wiper arms. Refer to Windshield Wiper Arm Replacement .
  6. Install the antenna mast. Refer to Fixed Antenna Mast Replacement .
  7. Install the inside rear view mirror. Refer to Inside Rearview Mirror Replacement .
  8. Close the hood.
  9. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
scientia non olet · About LEMON Manuals