LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 204 (Cruise Control System) >> Diagnostic Information and Procedures >> Cruise Control Malfunction >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
Switch Function Resistance Value Range (Ω) Counts
OFF O.L. 0
On 7.8-8.6K Ω 29
+ RES 2.7-3.0K Ω 76
- SET 1.2-1.3K Ω 148
  1. Engine ON, observe the scan tool Cruise parameter in the IPM while pressing each of the cruise control switches. The counts should match with the above table, as the applicable switch is pressed.
  2. Engine ON, observe the scan tool Cruise Cancel Switch parameter in the RIM. The parameter should switch between Active and Inactive accordingly with the depressed cruise cancel switch.