Circuit/System Verification
WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Verify that B3794 is not set as current or history before performing this diagnostic. If B3794 is set as current or history, go to DTC B3794 .
Engine ON, observe the scan tool Cruise parameter while pressing each of the cruise control switches. The Counts should match with the table below, as the applicable switch is pressed.
| Switch Function | Resistance Value Range (Ω) | Counts |
|---|---|---|
| OFF | O.L. | 0 |
| On | 7.8-8.6K Ω | 29 |
| Resume | 2.7-3.0K Ω | 76 |
| Set | 1.2-1.3K Ω | 148 |