LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Lighting Systems) >> Repair Instructions >> Ambient Light Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing Ambient Light Sensor
    GM1245415Courtesy of GENERAL MOTORS CORP.
  1. Carefully use a flat-bladed tool, and remove the sensor from the upper portion of the instrument panel (I/P).
    2. Fig 2: View Of Ambient Light Sensor Electrical Connector
    GM1245411Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector (2) from the sensor ensuring the connector does NOT fall through the hole in the I/P.
  3. Remove the sensor from the vehicle.
scientia non olet · About LEMON Manuals