Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Hazard Warning Switch

Courtesy of GENERAL MOTORS CORP.

Position the switch (1) to the trim plate.
Ensure the switch key-way is indexed to the trim plate.
Install the switch to the trim plate ensuring the tabs are fully seated.

Fig 2: View Of Hazard Warning Switch Wiring

Courtesy of GENERAL MOTORS CORP.

Connect the hazard switch electrical connector.
Install the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .