LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Front Suspension System) >> Repair Instructions >> Front Lower Control Arm Bushing Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying J 41805
    GM1241423Courtesy of GENERAL MOTORS CORP.
  1. Using the J 41805  (1), install the rear bushing. See Special Tools .
    2. Fig 2: View Of Rear Bushing
    GM1241417Courtesy of GENERAL MOTORS CORP.
  2. Install the rear bushing to the predetermined measurement taken earlier.
  3. Install the lower control arm. Refer to Lower Control Arm Replacement (2WD, Z85, ZQ8) .
  4. Install the front drive axle, if equipped. Refer to Differential Carrier Assembly Replacement .
scientia non olet · About LEMON Manuals