LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 455 (Supplemental Inflatable Restraint System) >> Diagnostic Information and Procedures >> Passenger Presence System Displaying Code Procedure (Base) >> PPS Displaying Code Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

PPS Displaying Code Procedure

WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: When the sensing and diagnostic module (SDM) starts to communicate with the PPS module, the instrument panel cluster (IPC) and dash lights will begin dimming on and off. This is normal operation during this procedure and does not indicate additional system faults.
  1. Empty the front passenger seat.
  2. Install a scan tool.
  3. Turn ON the ignition, with the engine OFF, and wait for the PPS module to complete its bulb check function.
  4. With the scan tool, request the passenger presence system (PPS) DTCs. Follow the on screen instructions.
  5. The scan tool will then show any current or history DTCs. Refer to the Diagnostic Trouble Code (DTC) List - Vehicle to diagnose the DTC you have obtained.
scientia non olet · About LEMON Manuals