Removal Procedure

WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Refer to SIR Inflator Module Handling and Storage Warning .

WARNING: A deployed dual stage inflator module will look the same whether one or both stages were used. Always assume a deployed dual stage inflator module has an active stage 2. Improper handling or servicing can activate the inflator module and cause personal injury.

WARNING: Refer to SIR Warning .

Disable the SIR system. Refer to SIR Disabling and Enabling .
Remove the instrument panel (I/P) retainer. Refer to Instrument Panel Retainer Replacement .

Fig 1: I/P Module Wire Harness

Courtesy of GENERAL MOTORS CORP.

Note the wire harness routing position on the I/P module, to help in assembly.

Fig 2: I/P Module & Fasteners

Courtesy of GENERAL MOTORS CORP.

Remove the I/P module mounting fasteners.
Remove the I/P module from the I/P.