Installation Procedure

WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Negative Battery Cable & Battery Current Sensor

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Ensure that the tape tab is pointing away from the battery prior to installation.

Squeeze the negative battery cable branches together, while sliding the NEW battery current sensor (2) up onto the negative battery cable (1).
Using NEW tie straps and electrical tape, attach the battery current sensor to the negative battery cable.
Install the negative battery cable. Refer to Battery Negative Cable Replacement (LH2 with Top Post) or Battery Negative Cable Replacement (LLT With Side Post) or Battery Negative Cable Replacement (LLT With Top Post) or Battery Negative Cable Replacement (LH2 With Side Post) .