LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2008 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 469 (Fixed And MOVEABLE Windows System) >> Repair Instructions >> Windshield Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a stationary window into the opening. Refer to Adhesive Installation of Stationary Windows .
  2. Install the windshield side reveal moldings, if equipped. Refer to Windshield Side Reveal Molding Replacement .
  3. Install the outside moisture sensor, if equipped.
  4. Install the VDAAW module, if equipped. Refer to Vehicle Direction Alert Alarm Warning Module Replacement .
  5. Install the rearview mirror. Refer to Inside Rearview Mirror Replacement (UE1) or Inside Rearview Mirror Replacement (DD7, DD8) .
  6. Install the interior windshield garnish moldings. Refer to Windshield Pillar Garnish Molding Replacement .
  7. Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement .
  8. Install the windshield wipers arms. Refer to Windshield Wiper Arm Replacement .
  9. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  10. Close the hood.
scientia non olet · About LEMON Manuals