Steering Column Lock Control Module Scan Tool Information
WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
Steering Column Lock Control Module Scan Tool Data Parameters
| Parameter | Operating Conditions | Expected Value | Definition |
|---|---|---|---|
| Operating Conditions: Ignition is ON, engine OFF, and vehicle is stationary | |||
| Battery Voltage Signal | - | B+ | The scan tool displays battery voltage. |
| Column Lock State | - | Varies | This scan tool displays the state on the column lock. |
| Ignition Cycle Counter | - | Counts | The scan tool displays the ignition cycles in counts. |
| Password Status | - | Varies | The scan tool displays the password status |
Steering Column Lock Control Module Scan Tool Output Controls
| Scan Tool Output Control | Additional Menu Selections | Description |
|---|---|---|
| Column Lock | Special Function | The scan tool allows you to command the column lock actuator to the lock position. |
| Column Unlock | Special Function | The scan tool allows you to command the column lock actuator to the unlock position. |