July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Body Control Module Replacement

Fig 1: Identifying Body Control Module

GM1955110

Courtesy of GENERAL MOTORS CORP.

Callout

Component Name

1

Body Control Module

Procedure

Remove the tape securing the BCM wiring harness prior to removing connectors.
Disconnect the electrical connectors.
Press on the tabs to release the body control module.
After servicing BCM use a tie strap to secure the wiring harness where the tape was removed.
If a replacement module is installed, program the module. Refer to Control Module References