LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2009 >> H2 V8-6.2L >> Repair and Diagnosis >> Body and Frame >> Weatherstrip >> Trunk / Liftgate Weatherstrip >> Service and Repair >> Liftgate Weatherstrip Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Liftgate Weatherstrip Replacement




Liftgate Weatherstrip Replacement

Removal Procedure

1. Open the liftgate.




2. Pull the weatherstrip from the liftgate opening pinch-weld flange (1).

Installation Procedure




1. Starting at the top center of the liftgate, install the weatherstrip to the pinch-weld flange. Work down the right and left sides towards the bottom center. Do not stretch the weatherstrip during installation.

Important: Spooning of the liftgate may be required to properly align the weatherstrip to the trim panels.


2. Use a rubber mallet to ensure proper seating of the weatherstrip on the pinch-weld flange (1).
3. Close the liftgate.

scientia non olet · About LEMON Manuals