Traction Control Switch: Service and Repair

Electronic Traction Control Switch Replacement

Removal Procedure




1. Remove the center I/P trim panel. Refer to Instrument Panel Center Air Outlet Bezel Replacement (Instrument Panel Center Air Outlet Bezel Replacement).
2. Gently lift the retaining tabs and remove the traction control switch (1) from the instrument panel (I/P) assembly (2).
3. Disconnect the harness connector from the traction control switch (1).

Installation Procedure




1. Connect the harness connector to the traction control switch (1).
2. Install the traction control switch (1) into the I/P assembly (2).
3. Ensure that the switch (1) is secure into both retaining tabs.
4. Install the center I/P trim panel. Refer to Instrument Panel Center Air Outlet Bezel Replacement (Instrument Panel Center Air Outlet Bezel Replacement).