Circuit/System Testing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the antenna coax from the DRR. Connect the EL-48028 to the DRR. See Special Tools .
- Radio ON, tuned to XM, verify DTC B1259 is not set as current.
- If the DTC is current, replace the DRR.
- Ignition OFF, reconnect the antenna coax to the DRR, disconnect the digital radio antenna coax from the digital radio antenna.
- Ignition ON, test for 4.5-5.5 volts between the antenna coax center terminal and the coax outer shield.
- If not within the specified range, replace the antenna coax.
- If all circuits test normal, replace the digital radio antenna.