ESC Module Programming
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
When the electronic suspension control (ESC) module is replaced, it must be programmed. Refer to Service Programming System (SPS) .
After programming, the ESC module must have the trimset procedure performed.
To perform the trimset procedure, the vehicle must be sitting at trim height on a level surface. Proceed with the trimset procedure following the onscreen instructions in the special functions menu.