LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2010 >> H3 Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Object Detection >> Diagnostic Information and Procedures >> Front Vision Camera System Malfunction >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

  1. Inspect the frontview camera for any debris on the lens or a damaged bezel or bezel seal.
    • Clean any debris from the lens. If the lens, bezel, or bezel seal are damaged, replace as necessary.
  2. Engine running, frontview camera switch is OFF, verify that the LCD is not deployed from the ISRVM.
    • If the LCD is deployed and an image is present, refer to Front Vision System Always On
    • If the LCD is deployed but there is no image, refer to LCD Always Deployed.
  3. Engine running, frontview camera switch is ON, verify that the LCD is deployed and an image is present on the display.
    • If the LCD is deployed but there is no image present, refer to Front Vision System Does Not Display
    • If the LCD will not deploy, refer to LCD Will Not Deploy.
scientia non olet · About LEMON Manuals