LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2010 >> H3 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Cellular Systems, Entertainment Systems & Navigation Systems) >> Diagnostic Information and Procedures >> DTC B2455 >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the inside rearview mirror.
  2. Test for less than 10 Ω between the drain circuit terminal 2 and ground.
    • If greater than the specified range, test the circuit for an open/high resistance.
  3. Ignition ON, test for 9.5-10.5 volts between the signal circuit terminal 10 and ground.
    • If less than the specified range, test the circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the CIM.
    • If greater than the specified range, test the circuit for a short to voltage. If the circuit tests normal, replace the CIM.
  4. If all circuit test normal, replace the cellular microphone.