Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Navigation Control Processor Bracket

Courtesy of GENERAL MOTORS CORP.

Install the bracket to the I/P structure.

Fig 2: View Of Navigation Control Processor Bracket Retaining Nuts

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution .

Install the nuts (1) retaining the bracket to I/P structure.
Tighten: Tighten the fasteners to 9 N.m (80 lb in).
Install the VCIM. Refer to Communication Interface Module Replacement .