Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Remove the accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .

Fig 1: View Of Radio

Courtesy of GENERAL MOTORS CORP.

Remove the 3 screws that retain the radio to the instrument panel (I/P).
Partially remove the radio disengaging the radio rear alignment locator to gain access to the electrical connectors.

Fig 2: View Of Radio Cables

Courtesy of GENERAL MOTORS CORP.

Disconnect the radio antenna cable.
Disconnect the electrical connectors to the radio.
Remove the radio from the vehicle.