Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Mode Cable

Courtesy of GENERAL MOTORS CORP.

Install the mode cable (4).
Make certain that the cable is properly seated in the notch in the HVAC module.

CAUTION: Refer to Fastener Caution .

Install the mode cam screw. Tighten the screw to 2 N.m (18 lb in).
Install the mode control cable (4) to the mode cam (2).
Install the mode control cable (4) to the retaining clip (3).