LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2010 >> H3 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Antilock Brake System With Traction Control System & Stability Control System) >> Repair Instructions >> Electronic Brake Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Separating EBCM
    GM2136331Courtesy of GENERAL MOTORS CORP.
  1. Carefully install the EBCM (1) and the 12 seals (2) to the BPMV.
    2. Fig 2: EBCM Bolts
    GM2136329Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
    NOTE: Do not reuse the EBCM bolts. Install new bolts.
  2. Install new EBCM bolts (1) and tighten to 2 N.m (18 lb in).
  3. Install the EBCM/BPMV assembly to the vehicle. Refer to Brake Pressure Modulator Valve Replacement .
  4. Program the EBCM. Refer to Control Module References .
scientia non olet · About LEMON Manuals