Generator Battery Control Module Replacement (V8)

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Generator Battery Control Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the negative battery cable. Refer to Battery Negative Cable Replacement (LH8) .
1	Retainer (Qty: 4) Tip: Mark the location of the retainers for installation.
2	Generator Battery Control Module Procedure Remove the zip tie from the module. Remove the tape retaining the module to the negative battery cable and note the location for installation. Remove the module from the cable.

Callout

Component Name

Preliminary Procedure:
Remove the negative battery cable. Refer to Battery Negative Cable Replacement (LH8) .

Retainer (Qty: 4)
Tip: Mark the location of the retainers for installation.

Generator Battery Control Module

Procedure

Remove the zip tie from the module.
Remove the tape retaining the module to the negative battery cable and note the location for installation.
Remove the module from the cable.