Rear

CAUTION: The eccentric bolt should be adjusted within a 90° range left and right from the center position.






NOTE:
The rear suspension standard value should be 7- 3 mm (0.28 to 0.12 inch).
The rear suspension (T) mounting bolt should be turned an equal amount on both sides when adjusting. Loosen the rear-side nut prior to adjust the eccentric bolt.
- Left Wheel: clockwise direction ...... toe-in.
- Right Wheel: clockwise direction ...... toe-out.
The scale has graduations of approximately 2.4 mm (0.09 inch).