Front Power Windows Only
Remove power window main switch. Check continuity between specified terminals with switch in specified position. See MAIN SWITCH CONTINUITY - FRONT POWER WINDOWS ONLY table. See Fig 1 . If continuity is not as specified, replace main switch.
MAIN SWITCH CONTINUITY - FRONT POWER WINDOWS ONLY
| Switch Position | Continuity Between Terminals No. | |
|---|---|---|
| Right Front | ||
| Up | 1 & 6; 3 & 4 | |
| Off | 1, 3 & 4 | |
| Down | 1 & 3; 4 & 6 | |
| Left Front | ||
| Up | 2 & 3; 5 & 6 | |
| Off | 2, 3 & 5 | |
| Down | 2 & 6; 3 & 5 | |