AUTO Button

NOTE: AUTO function will not operate driver's seat unless the parking brake (located under driver's side of instrument panel) is set before the key is removed from the ignition switch.

When IMS AUTO function is activated, driver's seat will move backward when key is removed from the ignition switch. The driver's seat will return to its original position when the key is inserted into the ignition switch. To activate AUTO function, press the AUTO button located on door panel control switch. A Green LED next to the button will illuminate, indicating that the AUTO function is activated.

When the transmission shift selector is moved to Reverse position, the outside mirrors will automatically move downward to change the area visible. The mirrors will return to their original position when the transmission selector is moved out of Reverse position. Mirror movement is based on the remote control outside mirror switch position. If remote control outside mirror switch is in the "L" (left) position, both mirrors will move down. If switch in the neutral (center) position, neither mirror will move. If the switch is in "R" (right) position, only the right mirror will move down.