Drive/Propeller Shaft

PROPELLER SHAFT





NOTE: Propeller shaft length indicates the length between the center points of each joint.

TORQUE SPECIFICATIONS
Yoke flange mounting nut 50 - 60 Nm (500 - 600 kg-cm, 37 - 44 ft. lbs.
Center bearing mounting nut 40 - 50400 - 50029 - 37
Center bearing to flange mounting 40 - 50 Nm (400 - 500 kg-cm, 29 - 37 ft. lbs.)
Self locking nut 100 - 120 Nm (1000 - 1200 kg-cm, 74 - 89 ft. lbs.)
VL joint mounting nut 30 - 40 Nm (300 - 400 kg-cm, 22 - 29 ft. lbs.)
Pinion mounting nut 230 - 250 Nm (2300 - 2500 kg-cm, 168 - 183 ft. lbs.)
Rubber coupling mounting nut 100 - 120 Nm (1000 - 1200 kg-cm, 74 - 89 ft. lbs.)