Troubleshooting Procedures

First, select the applicable malfunction symptom from the TROUBLE SYMPTOM CHARTS . Determine the condition of all circuits.

1. Make the following preliminary inspections :
   • Check that the installation of the actuator and accelerator cable are correct, and that the cables and links are securely connected.
   • Check that the accelerator pedal moves smoothly.
   • Adjust the cable so there is no excessive tension or excessive play on the accelerator cable.
   • Check that the actuator and unit assembly, cruise main, control switch and the connector of each cancel switch are all connected securely.
2. Check in the sequence indicated in the "TROUBLE SYMPTOM CHARTS".
3. If all components test good, replace the cruise control module.