LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2004 >> Elantra GLS, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Troubleshooting >> Communication With Hi-Scan (Pro) Is Not Possible (Communication With Abs Only Is Not Possible) >> Inspection Procedure 4 >> 2. Check The Power Source Of Abs Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

2. Check The Power Source Of Abs Control Module

  1. Disconnect the connector from the ABS control module.
  2. Turn the ignition switch ON, measure the voltage between terminal 4 of the ABS control module harness side connector (E37) and body ground.
    Fig 1: Measuring Voltage Between Terminal 4 Of ABS Control Module Harness Side Connector & Body Ground
    G00748229Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals