Esp/ESC Control Module: Installation
- Installation is the reverse of removal.
- Tighten the HECU mounting bolts and nuts to the specified torque.
Tightening torque
HECU bracket nuts : 5.9 ~ 9.8 Nm (0.6 ~ 1.0 kgf.m, 4.3 ~ 7.21 lb-ft)
HECU bracket mounting bolt : 16.7 ~ 25.5 Nm (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)