Dismounting/Mounting Procedures: Notes
CAUTION:
The tire should be dismounted from the wheel using the tire changer manufacturer's instructions. Use the following information to avoid damage during the dismounting/mounting procedures.
CAUTION:
Ensure that the wheel to be fitted is designed for sensor mount. There should normally be a mark to indicate this.
NOTE:
If tire pressure sensor is replaced, it will need to be initiated. See RESET PROCEDURES . The TPM system is not affected by wheel and tire rotation.
NOTE:
Tire pressure is also dependent on temperature of the tire. For every 18°F (10°C) increase in tire temperature, tire pressure increases about 1.5 psi (10 kPa). Tire pressure should only be adjusted when tires are cold (about the same as ambient air temperature).