LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2009 >> Elantra Touring Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Automatic Transaxle Control System) >> Input Speed Sensor >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Input Speed Sensor: Description

WARNING: This page is about a different variant/trim than selected.
SENSOR FUNCTION CHART

Sensor type
  1. Type: HALL SENSOR
  2. Operating voltage : DC 12V
  3. Current consumption : 22mA (Max)
Function
  1. Input speed sensor: Detect the input shaft rotation at the OD&REV retainer side to control oil pressure when shifting.
  2. Feedback control, clutch-clutch control, damper clutch control, shift range control, incorrect ratio control and sensor trouble detection signal.
Connector
G06136570Courtesy of HYUNDAI MOTOR CO.
Fig 1: Identifying Input Speed Sensor
G05348806Courtesy of HYUNDAI MOTOR CO.
STANDARD VALUE REFERENCE

Item Inspection item Standard value
Air gap Input speed sensor 0.035in (0.9mm)
Sensor resistance Input speed sensor Over 1 MΩ
Output voltage HIGH Over 4.8V
LOW Below 0.8V
scientia non olet · About LEMON Manuals