DDM Power Window Function

Outputs the following control signals to S-ECU according to local switch.

• Driver Power window Enable, Driver Power window Up, Driver Power window Down transmits the control signals (the status of ADM switch on DDM and Power window Inhibit) to ADM via CAN

  Outputs the control signals (the status of RLDM and RRDM switch on DDM and RDM Enable DDM) to control the Motor of RLDM and RRDM.

1. Power window Enable/Disable Control

   Power window function has Disable, Enable and 30s Timer states.

   Each module is enabled/disabled according to the inhibition signal of DDM as following.

   POWER WINDOW FUNCTION CHART
   
   

   Inhibition signal of DDM	Power window function
   	DDM	ADM	RLDM	RRDM
   ON	Disable	Disable	Disable	Disable
   OTHER DISABLE	Enable	Disable	Disable	Disable
   OFF	Enable	Enable	Enable	Enable