LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2009 >> Genesis 4.6 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Smart Key System >> Troubleshooting >> B1625 ECM Communication Data Failure >> Monitor Scantool data >> Check DTC status
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check DTC status

  1. Check DTC on the ECM with Scantool.
  2. Check that there is any DTC related ECM.
  3. Perform Troubleshooting the DTC from ECM with appropriate DTC Troubleshooting Guide first.
  4. Repair or replace as necessary after erasing DTC with Scantool.
  5. Check DTC on IPM side and erase the DTC with scantool.
  6. Has the DTC gone after erasing with scantool?

    YES 

    • Check poor connection between harness connector and IPM or ECM : Thoroughly check the looseness, poor connection, bent, corrosion, contamination, deformation or damage of connector. Repair or replace as necessary and then, go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

    • Go to Inspection & Repair procedure.
scientia non olet · About LEMON Manuals