Monitor Scan Tool Data

Connect scan tool to Data Link Connector (DLC).
IGN "ON" & Engine "OFF"
Monitor the "KEY STATUS", "SMARTRA STATUS" and "ECU STATUS" Parameter on the Scan tool.
Specification: 'LEARNT'

Fig 1: Monitoring KEY STATUS Smartra Status And ECU Status Parameter
Courtesy of HYUNDAI MOTOR CO.

Fig 1) This data show that 3 keys have been taught, ECU has been learnt, Key in key cylinder has been learnt and SMARTRA3 has been learnt
Has the "SMARTRA" status been learnt?
YES
- Keep "KEY ON" status for 1 hours to withdraw "Locked by Timer" status. Then register transponder and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Go to "COMPONENT INSPECTION " procedure.