LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2010 >> Elantra GLS >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> Power Window Relay >> Repair procedures >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Inspection

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Refer to "CRASH PAD ")

  3. Remove the junction box.
  4. Check for continuity between the terminals.
  5. There should be continuity between the No. 2 in the I/P-F and No. 17 terminal in the I/P-B when power and ground are connected to the No. 2 terminal in the I/P-H and No. 17 terminal in the I/P-B.
  6. There should be no continuity between the No. 2 terminal in the I/P-F and No. 17 terminal in the I/P-B when power is disconnected.
    Fig 1: Identifying Junction Box Connector Terminals
    G06864470Courtesy of HYUNDAI MOTOR CO.
    Fig 2: Continuity Chart
    G06864471Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals