LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2011 >> Azera GLS >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Radiator >> Repair Procedures >> Inspection >> Cap Testing
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Cap Testing

  1. Remove the radiator cap, wet its seal with engine coolant, then install it to pressure tester.
    Fig 1: Removing Radiator Cap
    G06804841Courtesy of HYUNDAI MOTOR CO.
  2. Apply a pressure of 93 ~ 123kPa (0.95 ~ 1.25kgf/cm2 , 14 ~ 19psi).
  3. Check for a drop in pressure.
  4. If the pressure drops, replace the cap.
scientia non olet · About LEMON Manuals