Repair Procedures: Replacement

WARNING: This page is about a different car, the 2011 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front wheel & tire.
Tightening torque:

88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)

Fig 1: Identifying Front Wheel & Tire
Courtesy of HYUNDAI MOTOR CO.

CAUTION: Be careful not to damage to the hub bolts when removing the front wheel & tire.
Loosen the nut and remove the lower arm (A).
Tightening torque:

78.5 ~ 88.3N.m(8.0 ~ 9.0kgf.m, 57.9 ~ 65.1lb-ft)

Fig 2: Identifying Lower Arm
Courtesy of HYUNDAI MOTOR CO.
Loosen the bolts & nuts and then remove the lower arm (A) with the sub frame.
Tightening torque:

Front

98.1 ~ 117.7N.m(10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

Rear

156.9 ~ 176.5N.m(16.0 ~ 18.0kgf.m, 115.7 ~ 130.2lb-ft)

Fig 3: Identifying Lower Arm (1 Of 2)
Courtesy of HYUNDAI MOTOR CO.

Fig 4: Identifying Lower Arm (2 Of 2)
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse of removal.