LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2011 >> Tucson GL, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control System >> Front Wheel Speed Sensor >> Repair procedures >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Inspection

  1. Measure the output voltage between the terminal of the wheel speed sensor and the body ground.
    CAUTION: In order to protect the wheel speed sensor, when measuring output voltage, a 100 Ω resister must be used as shown in illustration.
    Fig 1: Measuring Output Voltage Between Terminal Of Wheel Speed Sensor And Body Ground
    G06874576Courtesy of HYUNDAI MOTOR CO.
  2. Compare the change of the output voltage of the wheel speed sensor to the normal change of the output voltage as shown below.
    Fig 2: Wheel Speed Sensor Output Voltage Graph
    G06874577Courtesy of HYUNDAI MOTOR CO.

    V_low: 0.59V ~ 0.84V

    V_high: 1.18V ~ 1.68V

    Frequency range: 1 ~ 2, 500Hz

scientia non olet · About LEMON Manuals