LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Elantra Touring GLS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Engine Control System) >> Engine Control Module (ECM) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Control Module (ECM): Removal

WARNING: This page is about a different car, the 2011 Hyundai Elantra Touring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the ECM connector (A).
    Fig 1: Identifying ECM Connector And ECM Mounting Bolts Location
    G06136037Courtesy of HYUNDAI MOTOR CO.
  3. Remove the air cleaner & ECM assembly (Refer to ENGINE AND TRANSAXLE ASSEMBLY ).
  4. Remove the ECM mounting bolts (B) and then remove the ECM.
scientia non olet · About LEMON Manuals