Section 56 (Multi Function Switch): Removal

WARNING: This page is about a different car, the 2011 Hyundai Elantra Touring. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative (-) battery terminal.
Remove the steering column upper and lower shrouds (A) after removing 3 screws.
(Refer to STEERING COLUMN AND SHAFT ).

Fig 1: Identifying Steering Column Upper And Lower Shrouds With Screws
Courtesy of HYUNDAI MOTOR CO.
Disconnect the light switch connector (A) and the wiper switch connector (B).

Fig 2: Identifying Light Switch Connector And Wiper Switch Connector
Courtesy of HYUNDAI MOTOR CO.
Remove the lighting switch (A) by pushing the lock pin (B).

Fig 3: Pushing Lighting Switch Lock Pin
Courtesy of HYUNDAI MOTOR CO.
Remove the wiper switch (A) by pushing the lock pin (B).

Fig 4: Pushing Wiper Switch Lock Pin

Courtesy of HYUNDAI MOTOR CO.