Repair Procedures: Removal

Unzip the leather cover of shift lever.
Remove the muffler assembly. (refer to approprate INTAKE & EXHAUST SYSTEM article)
Remove the heat shield cover (A).

Fig 1: Identifying Heat Shield Cover
Courtesy of HYUNDAI MOTOR CO.
Disassemble the propeller shaft from the transmission by removing the bolts (A-3ea).

Fig 2: Identifying Propeller Shaft Bolts
Courtesy of HYUNDAI MOTOR CO.
Remove the base bracket (C) and select rod (D) from the transmission by removing the clips (A-2ea) and snap pin (B).

Fig 3: Identifying Base Bracket, Select Rod, Clip, & Snap Pin
Courtesy of HYUNDAI MOTOR CO.

Fig 4: Identifying Clip
Courtesy of HYUNDAI MOTOR CO.
Remove the mounting nuts (A-4ea) of shift lever assembly.

Fig 5: Identifying Mounting Nuts Of Shift Lever Assembly
Courtesy of HYUNDAI MOTOR CO.
Pull out the shift lever assembly with the base bracket and select rod.
CAUTION: Be careful not to damage to the shift lever assembly.